Produces a dream-like sound.
| Parameter |
Value |
Explanation |
| ON/OFF |
OFF, ON |
Turns this effect on/off. |
| TIME |
1 ms–2000 ms, BPM ŀ–Ō |
Adjusts the delay time.
- When set to BPM, the value of each parameter will be set according to the value of the “MASTER BPM” specified for each memory. This makes it easier to achieve effect sound settings that match the tempo of the song.
- If, due to the tempo, the time is longer than the range of allowable settings, it is then synchronized to a period either 1/2 or 1/4 of that time.
|
| TRIGGER |
OFF, ON |
If this is ON, the WARP effect is applied. |
| LEVEL |
0–100 |
Adjusts the volume of the effect sound. |
| BPM |
40–250 |
Adjusts the BPM value for each memory.
- BPM (beats per minute) indicates the number of quarter note beats that occur each minute.
- When you have an external MIDI device connected, the MASTER BPM synchronizes to the external MIDI devices tempo, making it impossible to set the MASTER BPM. To enable setting of the MASTER BPM, set “SYNC CLOCK” to “INTERNAL”.
|
| CARRYOVER |
OFF, ON |
Sets whether to make the sound of the effect carry over or not after you turn it off. |
