Here you can specify how the pedals will work during performance.
| Parameter | Value | Explanation |
|---|---|---|
| BANK MODE | WAIT1 | The memory does not switch simply because the screen display changes, even when you press the bank pedal to switch banks. At the moment you press the bank pedal, the bank and number are confirmed, and the unit switches to the next memory. |
| WAIT2 | The display blinks when you press the bank pedal, and you can select a number without switching banks. At the moment you press the bank pedal, the bank and number are confirmed, and the unit switches to the next memory. You can switch to a number within the same bank even when a function besides a number is set for a number pedal. You can also switch banks by pressing the bank pedal while the display is blinking. | |
| IMMEDIATE | The memory switches instantly when a BANK pedal or any of the number pedals is pressed. | |
| BANK EXTENT MIN | U01–U50 P01–P25 |
Sets the lower limit for the banks. |
| BANK EXTENT MAX | U01–U50 P01–P25 |
Sets the upper limit for the banks. |
| LOOP MODE | MONO | Mixes the L/R signals for mono operation. The recording time is 38 seconds. |
| STEREO | Operate in stereo. The recording time is 19 seconds. |
|
| LOOP REC ACTION | Specifies how the looper operates when you press the pedal. | |
| RECÓPLAYÓDUB | Operation will switch in the order of Recording Ó Playback Ó Overdubbing. | |
| RECÓDUBÓPLAY | Operation will switch in the order of Recording Ó Overdubbing Ó Playback. | |
| DELETE WARNING | OFF, ON | Sets whether to show a confirmation message when you try to delete an effect from the effect chain. |
| OVERWRITE WARNING | OFF, ON | Sets whether to show a confirmation message when you try to overwrite an effect in the effect chain. |