1. Hold down the [SHIFT] button and press the [PATTERN] button.

    The PATTERN SETTINGS screen appears.

  2. Use the [1] knob or press the [ä] [å] buttons to select the item.
  3. Use the [2] knob to select a value.

  4. Press the [EXIT] button to exit the PATTERN SETTINGS screen.

    Item

    Value

    Explanation

    Part

    Step Length

    1–64

    Sets the number of steps in the pattern.
    You can also set this by holding down the [PAGE/TIE] button and turning the [1] knob.

    Scale

    1/8, 1/16, 1/32, 1/4T, 1/8T, 1/16T

    For details, refer to “Note”.
    Play Mode

    Sets the order of steps for playback.

    You can also set this by holding down the [PAGE/TIE] button and turning the [2] knob.
    FWD Plays forward from the first step.
    REV Plays backward from the last step.
    FWD+REV Plays forward from the first step, and plays backward after reaching the last step.
    INV Switches to playing (inverts) the even-numbered and odd-numbered steps.
    RND Plays steps randomly.

    Gate Length Offset

    -128–127

    Sets the global gate length, which changes the relative gate length for each step.

    Shuffle

    -90–0–+90

    Adjusts the timing at which the even-numbered steps (2, 4, 6...) play.

    Smooth

    This applies fluid changes to the control change signals (motions), for smooth changes to the sound.　

    AUTO

    The Smooth function is disabled only for the slider and envelope knobs.

    OFF

    The Smooth function is disabled for all knobs.

    ON

    The Smooth function is enabled for all knobs.

    Motion Sw

    		 OFF, ON

    Toggles the output for the control change signals (motion) on/off.

    Mute Sw

    		 OFF, ON

    Switches the part mute on/off.

    First Step Sw

    		 OFF, ON

    Turns the First Step setting on/off.

    First Step

    From 1 to (value set in STEP LENGTH)

    This specifies any step besides the first and last step to be played back as the first step.

    Last Step Sw

    		 OFF, ON

    Switches the last step settings on/off.

    Last Step

    From 1 to (value set in STEP LENGTH)

    This specifies any step besides the first and last step to be played back as the last step.

    Level

    		 0–127

    Sets the part level.

    Pan

    L64–63R

    		 Sets the panning of each part’s sound when using stereo output.

    Pattern

    Pattern Level

    0–127

    Sets the overall pattern volume.

    Voice Reserve
    Part 1 1–60

    Specifies how polyphony resources are allocated to each part.
    The track is given priority for the specified number of voices.

    • The number of voices used differs depending on the sound.
    Part 2
    Part 3
    Part 4
    Part R

    The effect send (level) for each instrument in part R is the value of the effect send on this screen multiplied by the value of the effect send for each instrument, which is set using the knob.