This is a flanger in which the flanger pitch changes in steps.
The speed at which the pitch changes can also be specified in terms of a note-value of a specified tempo.
Parameter |
Value |
Explanation |
|---|---|---|
Type |
OFF, LPF, HPF |
Filter type OFF: No filter is used |
Cutoff |
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] |
Basic frequency of the filter |
Pre Delay |
0.0–100 [ms] |
Adjusts the delay time from the direct sound until the flanger sound is heard. |
Rate Sync |
OFF, ON |
If this is ON, the rate synchronizes with the tempo of the rhythm. |
Rate |
0.05–10.00 [Hz] |
Frequency of modulation |
Rate Note |
||
Depth |
0–127 |
Depth of modulation |
Phase |
0–180 [deg] |
Spatial spread of the sound |
Feedback |
-98–+98 [%] |
Adjusts the proportion of the flanger sound that is fed back into the effect. |
S.Rate Sync |
OFF, ON |
If this is ON, the rate synchronizes with the tempo of the rhythm. |
S.Rate |
0.10–20.00 [Hz] |
Rate (period) of pitch change |
S.Rate Nt |
||
Low Gain |
-15–+15 [dB] |
Amount of boost/cut for the low-frequency range |
High Gain |
-15–+15 [dB] |
Amount of boost/cut for the high-frequency range |
Balance |
D100：0W～D0：100W |
Volume balance between the direct sound (D) and the flanger sound (W) |
Level |
0～127 |
Output Level |