This effect allows the left/right signals that have similar phase to be tonally adjusted in a different way than the left/right signals that have different phase.
Parameter |
Value |
Explanation |
|---|---|---|
M EQ Switch |
OFF, ON |
Switches whether to apply tonal adjustment to left/right input signals whose phase is similar (in phase). |
M In G |
-12.00–+12.00 [dB] |
Volume of left/right input signals whose phase is similar (in phase) |
M Low F |
20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400 [Hz] |
Frequency of the low range |
M Low G |
-12.00–+12.00 [dB] |
Amount of boost/cut for the low-frequency range |
M Mid1 F |
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] |
Frequency of the middle range 1 |
M Mid1G |
-12.00–+12.00 [dB] |
Gain of the middle range 1 |
M Mid1 Q |
0.5, 1.0, 2.0, 4.0, 8.0 |
Width of the middle range 1 Set a higher value for Q to narrow the range to be affected. |
M Mid2 F |
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] |
Frequency of the middle range 2 |
M Mid2G |
-12.00–+12.00 [dB] |
Gain of the middle range 2 |
M Mid2 Q |
0.5, 1.0, 2.0, 4.0, 8.0 |
Width of the middle range 2 Set a higher value for Q to narrow the range to be affected. |
M Mid3 F |
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] |
Frequency of the middle range 3 |
M Mid3G |
-12.00–+12.00 [dB] |
Gain of the middle range 3 |
M Mid3 Q |
0.5, 1.0, 2.0, 4.0, 8.0 |
Width of the middle range 3 Set a higher value for Q to narrow the range to be affected. |
M High F |
2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500, 16000 [Hz] |
Frequency of the high range |
M HighG |
-12.00–+12.00 [dB] |
Amount of boost/cut for the high-frequency range |
S EQ Switch |
OFF, ON |
Switches whether to apply tonal adjustment to left/right input signals whose phase is distant (opposite phase). |
S In G |
-12.00–+12.00 [dB] |
Volume of left/right signals whose phase is distant (opposite phase) |
S Low F |
20, 25, 31, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400 [Hz] |
Frequency of the low range |
S Low G |
-12.00–+12.00 [dB] |
Amount of boost/cut for the low-frequency range |
S Mid1 F |
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] |
Frequency of the middle range 1 |
S Mid1G |
-12.00–+12.00 [dB] |
Gain of the middle range 1 |
S Mid1 Q |
0.5, 1.0, 2.0, 4.0, 8.0 |
Width of the middle range 1 Set a higher value for Q to narrow the range to be affected. |
S Mid2 F |
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] |
Frequency of the middle range 2 |
S Mid2G |
-12.00–+12.00 [dB] |
Gain of the middle range 2 |
S Mid2 Q |
0.5, 1.0, 2.0, 4.0, 8.0 |
Width of the middle range 2 Set a higher value for Q to narrow the range to be affected. |
S Mid3 F |
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz] |
Frequency of the middle range 3 |
S Mid3G |
-12.00–+12.00 [dB] |
Gain of the middle range 3 |
S Mid3 Q |
0.5, 1.0, 2.0, 4.0, 8.0 |
Width of the middle range 3 Set a higher value for Q to narrow the range to be affected. |
S High F |
2000, 2500, 3150, 4000, 5000, 6300, 8000, 10000, 12500, 16000 [Hz] |
Frequency of the high range |
S HighG |
-12.00–+12.00 [dB] |
Amount of boost/cut for the high-frequency range |
Level |
0–127 |
Output Level |