This is a stereo  phaser. The phaser effect will be varied gradually.

Parameter

Value

Explanation

Mode 4-STAGE, 8-STAGE, 12-STAGE Number of stages in the phaser
Manual 0–127 Adjusts the basic frequency from which the sound will be modulated.
Rate Sync OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Tempo (Pattern)

Tempo (System)

Rate 0.05–10.00 [Hz]

Frequency of modulation

Rate Note

Note

Depth

0–127

Depth of modulation

Polarity INVERSE, SYNCHRO

Selects whether the left and right phase of the modulation will be the same or the opposite.

INVERSE: The left and right phase will be opposite.
When using a mono source, this spreads the sound.
SYNCHRO: The left and right phase will be the same.
Select this when inputting a stereo source.

Resonance

0–127

Amount of feedback

Feedback

-98–+98 [%]

Adjusts the proportion of the phaser sound that is fed back into the effect.
Negative (-) settings will invert the phase.

S Rate Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Tempo (Pattern)

Tempo (System)

S.Rate

0.10–20.00 [Hz]

Rate of the step-wise change in the phaser effect

S.Rate Nt

Note

Mix

0–127

Level of the phase-shifted sound

Low Gain

-15–+15 [dB]

Amount of boost/cut for the low-frequency range

High Gain

-15–+15 [dB]

Amount of boost/cut for the high-frequency range

Level

0–127

Output Level