A stereo delay in which the delay time can be varied smoothly.

Parameter

Value

Explanation

Delay Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Tempo (Pattern)

Tempo (System)

D.Time

1–1300

Delay time from when the original sound is heard to when the delay sound is heard

D.Time Nt

Note

Acceleration

0–15

Adjusts the speed which the Delay Time changes from the current setting to a specified new setting.
The rate of change for the Delay Time directly affects the rate of pitch change.
Feedback -98–+98 [%] Adjusts the proportion of the delay sound that is fed back into the effect.
Negative (-) settings will invert the phase.
HF Damp 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS [Hz] Adjusts the frequency above which sound fed back to the effect is filtered out.
If you don’t want to filter out any high frequencies, set this parameter to BYPASS.
Low Gain -15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-frequency range
Balance D100: 0W–D0: 100W Volume balance between the direct sound (D) and the delay sound (W)
Level 0–127 Output Level