This effect allows the left/right signals that have similar phase to be adjusted to a different sense of volume than the left/right signals that have different phase.
Parameter |
Value |
Explanation |
|---|---|---|
| M Comp Sw | OFF, ON | Switches whether to adjust the sense of volume for left/right input signals whose phase is similar (in phase). |
| M Attack | 0–124 | Sets the speed at which compression starts |
| M Release | 0–124 | Adjusts the time after the signal volume falls below the M Thres Level until compression is no longer applied. |
| M Thres | -60–0 [dB] | Adjusts the volume at which compression begins |
| M Knee | 0–30 [dB] | This is a function that smooths the onset of compression from the uncompressed state; it gradually applies compression starting earlier than M Thres. Higher values produce a smoother transition. |
| M Ratio | 1: 1, 1.5: 1, 2: 1, 4: 1, 16: 1, INF: 1 | Compression ratio |
| M Gain | 0–+18 [dB] | Level of the output sound |
| S Comp Sw | OFF, ON | Switches whether to adjust the sense of volume for left/right input signals whose phase is distant (opposite phase). |
| S Attack | 0–124 | Sets the speed at which compression starts |
| S Release | 0–124 | Adjusts the time after the signal volume falls below the S Thres Level until compression is no longer applied. |
| S Thres | -60–0 [dB] | Adjusts the volume at which compression begins |
| S Knee | 0–30 [dB] | This is a function that smooths the onset of compression from the uncompressed state; it gradually applies compression starting earlier than S Thres. Higher values produce a smoother transition. |
| S Ratio | 1: 1, 1.5: 1, 2: 1, 4: 1, 16: 1, INF: 1 | Compression ratio |
| S Gain | 0–+18 [dB] | Level of the output sound |
| Level | 0–127 | Output Level |