SBF-325 (Flanger)

This effect reproduces Roland’s SBF-325 analog flanger.
It provides three types of flanging effect (which adds a metallic resonance to the original sound) and a chorus-type effect.

Parameter	Value	Explanation
Mode	Types of flanging effect
	FL1	A typical mono flanger
	FL2	A stereo flanger that preserves the stereo positioning of the original sound
	FL3	A cross-mix flanger that produces a more intense effect
	CHO	A chorus effect
Rate Sync	OFF, ON	If this is ON, the rate synchronizes with the tempo of the rhythm. Tempo (Pattern) Tempo (System)
Rate	0.02–5.00 [Hz]	Modulation frequency of the flanger effect
Rate Note	Note	Modulation frequency of the flanger effect
Depth	0–127	Modulation depth of the flanger effect
Manual	0–127	Center frequency at which the flanger effect is applied
Feedback	0–127	Amount by which the flanging effect is boosted If Mode is CHO, this setting is ignored.
RMod Phase	NORM, INV	Phase of the right channel modulation: Normally, you will leave this at Normal (NORM). If you specify Inverted (INV), the modulation (upward/downward movement) of the right channel is inverted.
L Phase	NORM, INV	Phase when mixing the flanging sound with the original sound NORM: normal phase INV: inverse phase
R Phase	NORM, INV
Level	0–127	Output Level