You can copy and paste the data in a pattern to a different pattern, part or step.

Copying the Data

  1. Hold down the [SHIFT] button and press the [13] button.

    The COPY screen appears.

  2. Press the [ç] [æ] buttons or the [1] knob to select what to copy (the copy source).

    Copy source

    Explanation

    PATTERN

    Copies the entire contents of the pattern.
    The tone numbers that are loaded into each part of the pattern are also copied/pasted.

    The existing content of tones that are not saved are lost when you paste the new data.

    PART

    Copies the content of the current part from the pattern.
    Tone numbers are not copied/pasted.

    STEP

    Copies the content of one step from the step sequencer of the current part.
    Use the [2] knob or the [1]–[16] buttons to select what to copy/paste.

    MULTI-STEP

    Copies the content of multiple steps from the step sequencer of the current part.

  3. Press the [ä] button to execute the copy operation.

    When the source is MULTI-STEP, the SELECT STEPS screen appears.


    Use the [1] knob to select the starting step and the [2] knob to select the ending step number, and press the [ENTER] button to execute the copy operation.

Pasting the Data

  1. Follow the steps in “Selecting and Playing a Pattern” to select the copy destination pattern.
  2. Hold down the [SHIFT] button and press the [1]–[5] buttons to select the copy destination part.
  3. Follow steps 1–2 in “Copying the Data” to select the copy source.

  4. Press the [å] button to execute the paste operation.

    When the copy source is MULTI-STEP, the SELECT STEPS screen appears.


    Use the [1] knob or the [2] knob to select the starting step number, and press the [ENTER] button to execute the paste operation.