Parameter |
Value |
Explanation |
|---|---|---|
| Cho PreDly | 0.0–100 [ms] | Adjusts the delay time from the direct sound until the chorus sound is heard. |
| Cho Sync | OFF, ON | If this is ON, the rate synchronizes with the tempo of the rhythm. |
| C. Rate | 0.05–10.00 [Hz] | Modulation frequency of the chorus effect |
C.Rate Nt |
||
| Cho Depth | 0–127 | Modulation depth of the chorus effect |
| Cho Bal | D100: 0W–D0: 100W | Volume balance between the direct sound (D) and the chorus sound (W) |
| Flg PreDly | 0.0–100 [ms] | Adjusts the delay time from the direct sound until the flanger sound is heard. |
| Flg Sync | OFF, ON | If this is ON, the rate synchronizes with the tempo of the rhythm. |
| F. Rate | 0.05–10.00 [Hz] | Modulation frequency of the flanger effect |
F.Rate Nt |
||
| Flg Depth | 0–127 | Modulation depth of the flanger effect |
| Flg Fbk | -98–+98 [%] | Adjusts the proportion of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase. |
| Flg Bal | D100: 0W–D0: 100W | Adjusts the volume balance between the sound that is sent through the flanger (W) and the sound that is not sent through the flanger (D). |
| Level | 0–127 | Output Level |