This effect has four delays.

Parameter

Value

Explanation

Dly1 Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Tempo (Pattern)

Tempo (System)

D1.Time

1–2600

Adjusts the time from the original sound until delay 1 sounds is heard.

D1Time Nt

Note

Dly2 Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Tempo (Pattern)

Tempo (System)

D2.Time

1–2600

Adjusts the time from the original sound until delay 2 sounds is heard.

D2Time Nt

Note

Dly3 Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Tempo (Pattern)

Tempo (System)

D3.Time

1–2600

Adjusts the time from the original sound until delay 3 sounds is heard.

D3Time Nt

Note

Dly4 Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Tempo (Pattern)

Tempo (System)

D4.Time

1–2600

Adjusts the time from the original sound until delay 4 sounds is heard.

D4Time Nt

Note

Dly1 Fbk

-98–+98 [%]

Adjusts the proportion of the delay sound that is fed back into the effect.
Negative (-) settings will invert the phase.

HF Damp

200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS [Hz]

Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want to filter out any high frequencies, set this parameter to BYPASS.

Dly1 Lv

0–127

Volume of each delay

Dly2 Lv

0–127

Dly3 Lv

0–127

Dly4 Lv

0–127

Low Gain

-15–+15 [dB]

Amount of boost/cut for the low-frequency range

High Gain

-15–+15 [dB]

Amount of boost/cut for the high-frequency range

Balance

D100: 0W–D0: 100W

Volume balance between the direct sound (D) and the delay sound (W)

Level

0–127

Output Level