Parameter

Value

Explanation
Delay Sync OFF, ON If this is ON, the delay synchronizes with the tempo.
D. Time (ms) 1–2600 Adjusts the time until the second delay sound is heard.

D.Time（Nt）

Note

Delay Fbk

-98–+98 [%]

Adjusts the proportion of the delay sound that is fed back into the effect.
Negative (-) settings will invert the phase.

Dly HF

200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000, BYPASS [Hz]

Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want to filter out any high frequencies, set this parameter to BYPASS.
Dly1 Pan L64–63R Adjusts the stereo location of delay 1.
Dly2 Pan L64–63R Adjusts the stereo location of delay 2.
Dly1 Lv 0–127 Adjusts the volume of delay 1.
Dly2 Lv 0–127 Adjusts the volume of delay 2.
Low Gain -15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-frequency range
Balance D100: 0W–D0: 100W Adjusts the volume balance between the sound that is sent through the delay (W) and the sound that is not sent through the delay (D).
Level 0–127 Output Level