Use the [2] knob to set the waveform.

Parameter

Controllers

Value

Explanation

Coarse Tune

PITCH

-24–+24

Specifies the pitch in semitone steps (maximum ±2 octaves).

Fine Tune

SHIFT+PITCH

-50–+50

Specifies the pitch in cents (maximum ±50 cents).

PWM Depth

TIMBRE

0–63

Sets how much the LFO is applied (depth) to the PW (pulse width).
The pulse width is modulated according to the LFO settings.

Pulse Width

SHIFT+TIMBRE

0–63

This effect changes the duty ratio of the pulse width to alter the waveform.
You can use this effect with other waveforms besides SQR (square wave).

  • A value of zero results in a 50:50% duty ratio.

Detune

[OSC 1] slider

0–48

Sets the pitch of the synchronized oscillator in semitones.

PEnv Attack

[OSC 2] slider

0–1023

Sets the attack time of the pitch envelope.

PEnv Decay

[OSC 3] slider

0–1023

Sets the decay time of the pitch envelope.

PEnv Depth

[OSC 4] slider

0–100

Sets the intensity of the pitch envelope.
Larger values produce a greater change with the pitch envelope.

Mono/Poly

[OSC 1] and [OSC 2] buttons

MONO, POLY

Sets whether the tones play in polyphonic (POLY) or monophonic (MONO) mode.

Sync

[OSC 4] button

OFF, ON

Turns oscillator sync on/off.