Parameter

Value

Explanation
Categ Selects the MFX category.

Type

Selects the MFX type.

Switch

OFF, ON

Switches the MFX on/off.

MFX parameters

Depends on the MFX type.

For details, refer to each MFX parameter.

Cho Send

0–127

Sets the amount of chorus.
If you don’t want to add the chorus effect, set it to 0.

Rev Send

0–127

Sets the amount of reverb.
If you don’t want to add the reverb effect, set it to 0.

  • When sending audio signals with the rhythm part from the MFX to the pattern chorus/reverb, raise the Reverb/Chorus/Delay Send level of the rhythm part to set on the MIXER screen.
    Ø “Adjusting the Volume Balance and Effect Sends”
  • For the rhythm part, the signal sent from the MFX to the pattern chorus/reverb is routed separately from the effect send for each rhythm instrument.