OFF

Turns the effect off.

Delay

This is a stereo delay.

Parameter

Value

Explanation

Dly Sync

OFF, ON

If this is ON, the delay synchronizes with the tempo.

Dly Msec

1–1300

Adjusts the delay time from the direct sound until the delay sound is heard.

Dly Note

Note

Feedback

-98–+98 [%]

Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase.

HF Damp

200–8000 [Hz], BYPASS (*1)

Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want to filter out any high frequencies, set this parameter to BYPASS.
T-Ctrl Dly (Time Control Delay)

This is a delay in which the delay time can be varied smoothly.

Parameter

Value

Explanation
Dly Sync OFF, ON If this is ON, the delay synchronizes with the tempo.
Dly Msec 1–1300 Adjusts the delay time from the direct sound until the delay sound is heard.
Dly Note Note
Acceleration 0–15 When you change the delay time, this specifies the time over which the current delay time changes to the specified delay time.
This affects the speed of pitch change as well as the delay time.
Feedback -98–+98 [%] Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase.
HF Damp 200–8000 [Hz], BYPASS (*1) Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want to filter out any high frequencies, set this parameter to BYPASS.
Delay Ó Trem (delay Ó tremolo)

Tremolo is applied to the delay sound.

Parameter

Value

Explanation
Input MONAURAL The input is mono-mixed.
STEREO The sound is input in stereo.
Dly Sync OFF, ON If this is ON, the delay synchronizes with the tempo.
Dly Msec 1–1300 Adjusts the delay time from the direct sound until the delay sound is heard.
Dly Note Note
Feedback -98–+98 [%] Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase.
HF Damp 200–8000 [Hz], BYPASS (*1) Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want to filter out any high frequencies, set this parameter to BYPASS.
Trm Switch OFF, ON Switches the tremolo effect on/off
Trm ModWave





 This sets how the panning changes.
TRI Triangle wave
SQR Square wave
SIN Sine wave
SAW1 Sawtooth wave
SAW2
TRP Trapezoidal wave
Trm Sync OFF, ON If this is on, the tremolo synchronizes with the tempo.
Trm Hz 0.05–10.00 [Hz] Adjusts the rate of the tremolo.
Trm Note Note
Trm Depth 0–127 Adjusts the depth of the tremolo.
2Tap PanDly (2Tap Pan Delay)

Delay sound is heard in the two locations you specify.

Parameter

Value

Explanation

Dly Sync

OFF, ON

If this is ON, the delay synchronizes with the tempo.

Dly Msec

1–1300

Adjusts the time until the second delay sound is heard.

Dly Note

Note

Feedback

-98–+98 [%]

Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase.

HF Damp

200–8000 [Hz], BYPASS (*1)

Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want to filter out any high frequencies, set this parameter to BYPASS.

Dly1 Pan

L64–63R

Adjusts the pan position of Delay 1.

Dly2 Pan

L64–63R

Adjusts the pan position of Delay 2.

Dly1 Level

0–127

Adjusts the volume of Delay 1.

Dly2 Level

0–127

Adjusts the volume of Delay 2.
3Tap PanDly (3Tap Pan Delay)

Delay sound is heard in the three locations you specify.

Parameter

Value

Explanation

Dly Sync

OFF, ON

If this is ON, the delay synchronizes with the tempo.

Dly Msec

1–2600

Delay time of the third delay sound after the original sound is heard.

Dly Note

Note

Feedback

-98–+98 [%]

Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase.

HF Damp

200–8000 [Hz], BYPASS (*1)

Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want to filter out any high frequencies, set this parameter to BYPASS.

Dly1 Pan

L64–63R

Adjusts the pan position of Delay 1.

Dly2 Pan

L64–63R

Adjusts the pan position of Delay 2.

Dly3 Pan

L64–63R

Adjusts the pan position of Delay 3.

Dly1 Level

0–127

Adjusts the volume of Delay 1.

Dly2 Level

0–127

Adjusts the volume of Delay 2.

Dly3 Level

0–127

Adjusts the volume of delay 3.
Note 1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4, 1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
(*1)

200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz], BYPASS