Auto Wah

LPF, BPF

Filter type

LPF: The wah effect will be applied over a wide frequency range.
BPF: The wah effect will be applied over a narrow frequency range.

0–127

Center frequency at which the wah effect is applied

0–127

Width of the frequency region at which the wah effect is applied
Increasing this value will make the frequency region narrower.

0–127

Sensitivity with which the filter is modified

UP, DOWN

Direction in which the filter will move

UP: The filter will change toward a higher frequency.
DOWN: The filter will change toward a lower frequency.

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Tempo (Pattern)

Tempo (System)

0.05–10.00 [Hz]

Frequency of modulation

Note

0–127

Depth at which the wah effect is modulated

0–180 [deg]

Adjusts the degree of phase shift of the left and right sounds when the wah effect is applied.

-15–+15 [dB]

Amount of boost/cut for the low-frequency range

-15–+15 [dB]

Amount of boost/cut for the high-frequency range

0–127

Output Level