This effect combines overdrive and filter.
Parameter |
Value |
Explanation |
|---|---|---|
Pre Type |
THRU, LPF, HPF, LSV, HSV |
Type of filter that precedes the distortion processing THRU: No filter is applied |
| Pre Freq | 20–16000 [Hz] | Frequency at which the pre-distortion filter operates |
| Pre Gain | -24.0–+24.0 [dB] | For the LSV/HSV types, the amount of boost/cut |
| Drive | 0.0–48.0 [dB] | Strength of distortion |
| Post1 Type | THRU, LPF, HPF, LSV, HSV | Type of filter 1 which follows the distortion processing |
| Post1Frq | 20–16000 [Hz] | Frequency at which post-distortion filter 1 operates |
| Post1Gain | -24.0–+24.0 [dB] | For the LSV/HSV types, the amount of boost/cut |
| Post2 Type | THRU, LPF, HPF, LSV, HSV | Type of filter 2 which follows the distortion processing |
| Post2Frq | 20–16000 [Hz] | Frequency at which post-distortion filter 2 operates |
| Post2Gain | -24.0–+24.0 [dB] | For the LSV/HSV types, the amount of boost/cut |
Post3 Type |
THRU, LPF, HPF, BPF, PKG |
Type of filter 3 which follows the distortion processing THRU: No filter is applied |
| Post3Frq | 20–16000 [Hz] | Frequency at which post-distortion filter 3 operates |
| Post3Gain | -24.0–+24.0 [dB] | For the PKG type, the amount of boost/cut |
| Post3 Q | 0.5–16.0 | Width of the frequency range affected by the filter |
| Sense | -60.0–0.0 [dB] | Adjust this value so that the sound is not made louder when distortion is applied. |
| PostGain | -48.0 +12.0 [dB] | Gain following distortion processing |
| Balance | D100: 0W–D0: 100W | Volume balance between the dry sound (D) and effect sound (W) |
| Level | 0–127 | Output Level |