Degrades the sound quality.

Parameter

Value

Explanation
Pre Filter Type 1, 2, 3, 4, 5, 6

Selects the type of filter applied to the sound before it passes through the Lo-Fi effect.
1: Compressor off
2–6: Compressor on
LoFi Type 1, 2, 3, 4, 5, 6, 7, 8, 9

Degrades the sound quality. The sound quality grows poorer as this value is increased.
Post Filter Type OFF, LPF, HPF

Selects the type of filter applied to the sound after it passes through the Lo-Fi effect.
OFF: No filter is used.
LPF: Cuts the frequency range above the Cutoff Freq
HPF: Cuts the frequency range below the Cutoff Freq
Post Filter Cutoff 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]

Basic frequency of the Post Filter
Low Gain -15–+15 [dB]

Gain of the low range
High Gain -15–+15 [dB] Gain of the high range

Balance (*1)

 D100:0W–D0:100W Volume balance between the direct sound (D) and the effect sound (W)
Level 0–127 Output Level


*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.