Isolator

Boost/Cut Low (*1)

-60–+4 [dB]

These boost and cut each of the High, Middle, and Low frequency ranges.
At -60 dB, the sound becomes inaudible. 0 dB is equivalent to the input level of the sound.

Boost/Cut Mid

-60–+4 [dB]

Boost/Cut High

-60–+4 [dB]

Anti Phase Low Sw

OFF, ON

Turns the Anti-Phase function on and off for the Low frequency ranges.
When turned on, the counter-channel of stereo sound is inverted and added to the signal.

Anti Phase Low Level

0–127

Level of the Anti-Phase function for the Low frequency ranges.
Adjusting this level for certain frequencies allows you to lend emphasis to specific parts. (This is effective only for stereo source.)

Anti Phase Mid Sw

OFF, ON

Settings of the Anti-Phase function for the Middle frequency ranges.
The parameters are the same as for the Low frequency ranges.

Anti Phase Mid Level

0–127

Low Boost Sw

OFF, ON

Turns Low Booster on/off.
This emphasizes the bottom to create a heavy bass sound.

Low Boost Level

0–127

Increasing this value gives you a heavier low end.
Depending on the Isolator and filter settings this effect may be hard to distinguish.

Level

0–127

Output Level