Chorus

This is a stereo chorus. A filter is provided so that you can adjust the timbre of the chorus sound.

Parameter	Value	Explanation
Filter Type	OFF, LPF, HPF	Type of filter OFF: No filter is used. LPF: Cuts the frequency range above the Cutoff Freq HPF: Cuts the frequency range below the Cutoff Freq
Cutoff Freq	200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]	Basic frequency of the filter
Pre Delay	0.0–100 [msec]	Adjusts the delay time from the direct sound until the chorus sound is heard.
Tempo Sync	OFF, ON	If this is ON, the rate synchronizes with the tempo of the rhythm. Ø KIT TEMPO
Rate (Hz)	0.05–10.00 [Hz]	Frequency of modulation
Rate (note)	Note Ø Note	Frequency of modulation
Depth (*1)	0–127	Depth of modulation
Phase	0–180 [deg]	Spatial spread of the sound
Low Gain	-15–+15 [dB]	Gain of the low range
High Gain	-15–+15 [dB]	Gain of the high range
Balance	D100:0W–D0:100W	Volume balance between the direct sound (D) and the chorus sound (W)
Level	0–127	Output Level

*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.