This is a stereo phaser. A phase-shifted sound is added to the original sound and modulated.

Parameter

Value

Explanation
Mode 4-STAGE, 8-STAGE, 12-STAGE

Number of stages in the phaser
Manual 0–127

Center frequency at which the sound is modulated
Tempo Sync OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.
Ø KIT TEMPO
Rate (Hz) 0.05–10.00 [Hz]

Modulation rate

Rate (note)

Note

Ø Note
Depth 0–127

Depth of modulation
Polarity INVERSE, SYNCHRO

Selects whether the left and right phase of the modulation will be the same or the opposite.
INVERSE: The left and right phase will be opposite.
When using a mono source, this spreads the sound.
SYNCHRO: The left and right phase will be the same.
Select this when inputting a stereo source.
Resonance 0–127

Amount of feedback
Cross Feedback -98–+98 [%]

Adjusts the proportion of the phaser sound that is fed back into the effect. Negative (-) settings will invert the phase.
Mix (*1) 0–127

Level of the phase-shifted sound
Low Gain -15–+15 [dB]

Gain of the low range
High Gain -15–+15 [dB]

Gain of the high range
Level 0–127

Output Level


*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.