This is a stereo phaser. The phaser effect will be varied gradually.
Parameter |
Value |
Explanation |
---|---|---|
Mode |
4-STAGE, 8-STAGE, 12-STAGE |
Number of stages in the phaser |
Manual |
0–127 |
Center frequency at which the sound is modulated |
Tempo Sync (Rate) |
OFF, ON |
If this is ON, the rate synchronizes with the tempo of the rhythm. |
Rate (Hz) |
0.05–10.00 [Hz] |
Modulation rate |
Rate (note) |
Note |
|
Depth (*1) |
0–127 |
Depth of modulation |
Polarity |
INVERSE, SYNCHRO |
Selects whether the left and right phase of the modulation will be the same or the opposite. |
Resonance |
0–127 |
Amount of feedback |
Cross Feedback |
-98–+98 [%] |
Adjusts the proportion of the phaser sound that is fed back into the effect. Negative (-) settings will invert the phase. |
Tempo Sync (Step Rate) |
OFF, ON |
If this is ON, the rate synchronizes with the tempo of the rhythm. |
Step Rate (Hz) |
0.10–20.00 [Hz] |
Rate of the step-wise change in the phaser effect |
Step Rate (note) |
Note |
|
Mix |
0–127 |
Level of the phase-shifted sound |
Low Gain |
-15–+15 [dB] |
Gain of the low range |
High Gain |
-15–+15 [dB] |
Gain of the high range |
Level |
0–127 |
Output Level |
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.