This is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a transparent chorus effect.
Parameter |
Value |
Explanation |
|---|---|---|
Pre Delay |
0.0–100 [msec] |
Adjusts the delay time from the direct sound until the chorus sound is heard. |
Tempo Sync |
OFF, ON |
If this is ON, the rate synchronizes with the tempo of the rhythm. |
Rate (Hz) |
0.05–10.00 [Hz] |
Frequency of modulation |
Rate (note) |
Note |
|
Depth (*1) |
0–127 |
Depth of modulation |
Phase |
0–180 [deg] |
Spatial spread of the sound |
Low Gain |
-15–+15 [dB] |
Gain of the low range |
High Gain |
-15–+15 [dB] |
Gain of the high range |
Balance |
D100:0W–D0:100W |
Volume balance between the direct sound (D) and the chorus sound (W) |
Level |
0–127 |
Output Level |
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.