Flattens out high levels and boosts low levels, smoothing out fluctuations in volume.

Parameter

Value

Explanation

Attack

0–124

Sets the time from when the input exceeds the Threshold until the volume starts being compressed.

Release

0–124

Adjusts the time after the signal volume falls below the Threshold Level until compression is no longer applied.

Threshold (*1)

-60–0 [dB]

Adjusts the volume at which compression begins.

Knee

0–30 [dB]

This is a function that smooths the onset of compression from the uncompressed state.

It gradually applies compression starting earlier than Threshold.
Higher values produce a smoother transition.

Ratio

1:1, 1.5:1, 2:1, 4:1, 16:1, INF:1

Compression ratio

Post Gain

0–+18 [dB]

Adjusts the output gain.
Level 0–127 Output Level


*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX Ctrl)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER EFFECT Knob (MASTER EFFECT CTRL)”.